-
Products (54)
- - Animal Surgery (2)
- - Centrifuge (4)
- - Common Labwares
- - Electrophoresis and Gel Imaging System (5)
- - Fermentation System (1)
- - Freezers and Refrigerators (3)
- - Hot Plate and Stirrers (9)
- - Liquid Handling (4)
- - Mixers and Rotators (4)
- - Pharmaceutical Tester (4)
- - Shakers and Incubators (5)
- - Syringe and Suction Pump (6)
- - Thermal Cycler (3)
- - Water Bath and Circulators (3)
- - Water Purification System (1)
- Applications (96)
- Common Labwares (109)
Heating Bath Circulators
Performance
Temperature range from ambient +10℃ to 150℃.
Microprocessor PID control.
Three point temperature calibration / Automatic tuning / Automatic run.
Accurate, stable, and efficient temperature management by using a powerful variable-speed pump.
(1 to 3 steps of pump for internal circulation and 4 to 5 steps for external circulation).
Powerful pump pressure and flow rate throughout the whole temperature range.
※ Bath fluid : Water at the normal temperature.
Convenience
Bright VFD display with quick adjustable dial knob. (0.1℃ resolution)
Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.)
Convenient memory function of up to three frequently set temperature.
Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve.
RS-232 /USB interface for external control and data collection.
Side handles enables convenience handling and transport.
Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox)
Safety
Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact.
Complete safety protection system with warning alarms.
- Low fluid level and dry-running, over-temperature, over-current.
Keypad lock function prevents accidental changes during operation.
|
Model |
CW3-05 |
CW3-10 |
CW3-20 |
CW3-30 |
|
|
Bath volume (L / cu ft) |
5 / 0.2 |
10 / 0.4 |
20 / 0.7 |
30 / 1.1 |
|
|
Temperature |
Working temperature range 2) (℃ / ℉) |
Amb. +10 to 150 / Amb. +18 to 302 |
|||
|
Temperature stability 1) (±℃ / ℉) |
0.05 / 0.09 |
||||
|
Heat up time to 70℃ / 158 ℉ (min) |
15 |
23 |
43 |
55 |
|
|
Dimension |
Bath opening / depth (W×L, D) (mm / inch) |
150×99×160 / 5.9×3.9, 6.3 |
211×154×180 / 8.3×6.1, 7.1 |
290×214×200 / 11.4×8.4×7.9 |
300×264×230 / 11.8×10.4×9 |
|
Exterior (W×L×H) (mm / inch) |
228×395×424 / 9.0×15.6×16.7 |
289×450×444 / 11.4×17.7×17.5 |
368×510×464 / 14.5×20.1×18.3 |
378×560×494 / 14.9×22×19.4 |
|
|
Net weight (kg / lbs) |
12.5 / 27.6 |
15.0 / 33.0 |
17.5 / 38.6 |
19.5 / 43.0 |
|
|
Electrical requirements (230V, 50/60 Hz) |
8.5A |
8.5A |
8.5A |
8.5A |
|
|
Cat. No. |
AAH52341K |
AAH52351K |
AAH52361K |
AAH52371K |
|
|
Electrical requirements (120V, 60 Hz) |
8.6A |
8.6A |
8.6A |
8.6A |
|
|
Cat. No. |
AAH52342U |
AAH52352U |
AAH52362U |
AAH52372U |
|
※ The lowest temperature that can be controlled depends on changes in ambient temperature and sample temperature. Therefore, please contact the distributor of our products before purchasing for technical consultation.
※ Technical data (according to DIN 12876)
※ In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting.
Bath fluid : Water at 50℃ / 122℉
On Wing Tat Co. Ltd
20/F, Unit 1-5, Midas Plaza,
1 Tai Yau St.,San Po Kong,
Kowloon, Hong Kong